Mercedes 190 E 2.3 16V Model kit

Product description : Mercedes 190 E 2.3 16V

Mercedes 190 E 2.3 16V
Launched in 1982, the "190" marked a turning point in the production of the prestigious car manufacturer from Stuttgart. Mercedes' entry-level car, it nevertheless incorporated significant stylistic and technical innovations.

The elegant design will also later influence the cars of the upper segments of the brand. From a technical point of view, the car adopted a longitudinal front engine, rear wheel drive and disc brakes on all four wheels. The front axle was of the MacPherson type and the rear multi-link suspension.

The first versions produced were fitted with two 1,998 cc petrol engines with carburetor or, in the 190E version, with injection. Shortly after, the sports version 2.3 16V was presented, which was also used in one-design sports competitions such as the "Nurburgring Champions Race Cup" of 1984, in which famous pilots of the time and some "old glories" of Formula 1.

---

Scale : 1:24
The 1:24 scale is mainly used for models of cars, motorcycles and aircraft. It allows a high level of detail. For example, a motorcycle model in the 1:24 scale will measure 4 inches / 10.4 cm if the original motorcycle measures 2.5m in length (250/24 = 10.41). A plane in the 1:24 scale will measure 1 foot 6 inches / 45cm in length if the aircraft model is 11m long (1100-1124 = 45.8).
Type of product : Model car kit
To build a plastic car model, you'll need a few materials:
- a cutter or cutting pliers
- and model glue.
You can also paint the model with brushes(acrylic or enamel).
The model consists of different parts to cut and assemble.
Construction time will vary depending on the number of parts.
An instruction manual is provided for you inside the box.

---

---

This reference is also named : -