Pilot 6T 2.4GHz Radio control

Product description : Pilot 6T 2.4GHz

6-channel (4+2) analogue radio, compatible with Tamiya truck MFUs.
2.4GHz FHSS modulation.

• 6-channel mini receiver / 4.5V-6.5 power supply

• Radio power supply 8 AA or NI-MH batteries

• FHSS modulation

• Dual Rate (CH1, CH2, CH4)

• Channel inverters (CH1 to CH6)

• Limit switches (CH1 to CH6)

• Sub trim -120 to +120(CH1 to CH6)

• Operating mode (Mode 1/2/3/4 without dismantling the radio)

• Mixes for planes, helicopters,…..

• Mechanical trims on CH1 to CH4

• Adjustable length aluminum handles

• 2 3-position switches for CH5 and CH6

• Three-colour LED indicating the status of the radio's batteries

• Connections to the receiver type FUTABA / GRAUPNER/JR

• Charging jack on the side of the radio

• USB cable for connection to a PC for SET UP of the radio. Free program to download from our website on the product page

• Possibility of replacing the three-position switches with a two-position model or a potentiometer

• Ring for attaching a strap (not included)< br />
• Carrying handle

• BIND cord included

• Compatible with TAMIYA MFC units

Configuration utility:
It It is possible to modify the configuration of your transmitter using the T6config program.

• Download the zip file from the link below.
Download the utility PilotT6


• 1 Unzip the Zip file on your desktop:
The PilotT6.zip file must be in your download folder. Right click on the Zip file. A vertical menu opens, select the 'Extract All' feature, and extract the data from the Zip file to your desktop.
At this point, you should find a PilotT6 folder on your desktop. Open this folder.


• 2 Installing the remote control drivers:
Before starting the installation via the executable t6config.exe, you must install the remote control drivers. Open the 'Windows_2K_XP_S2K3_Vista' folder, then run "CP210xVCPInstaller.exe". When this is finished, you must install the 't6config.exe' application.


• 3 Installing the utility:
Just double- click on 't6config.exe' to install the utility. When the installation is complete, a T6config icon appears on the desktop. you're done.


• Configuring the transmitter:
Connect the cable to the transmitter, then to a usb port. When the transmitter is recognized by the computer, a red diode lights up on the USB port of the cord. If the diode does not light up, the transmitter drivers must be installed (see step 2)
Launch the utility by double clicking on the T6config icon on the desktop.

To learn how to use this utility, refer to the manual supplied with the transmitter, page 6 -> 13.

---

---

---

Reference : 3425
This reference is also named : T3425 - T3425 - 3425